Zoukei-Mura 1:32 P-51D / K / Mustang IV

Home

 

 

 

 

Scale

1:32

Model

Plastic Model Kit, including 2-color molded and clear parts.

Total Parts

292

Size

L: 304mm  H: 115mm W: 356mm

Other

4 Marking Sheets included (Mustang IV - 2 types, P-51D early - 1 type, P-51K - 1 type,). The after parts for the P-51D kit can be used

 

Now, here are the WWII strongest fighters wearing Roundels!

 

You can feel like you are recreating a real aircraft! Furthermore, you can learn the aircraft’s usefulness, structures, mechanism, and even the circumstances of its development! In this matter, SWS Mustang IV is developed aiming to return faithfully to the starting point of the scale model. The “P-51 D”, “P-51 K”, and “Mustang IV” are perfectly recreated with various optional parts like Aero Products propellers with no cuffs, intakes on the side surface of the nose, and tail unit without dorsal fin. As assembling SWS kit, you can see the differences of the fighters’ performances which the pilots felt, and imagine the scene of the battlefield.

 

Here are some important points:

 

1) Auxilliary Intakes

 

 

Dont miss them!! 3 kinds of detailed auxiliary intakes carefully & individually built are enclosed!

 

Auxiliary intakes have been fixed behind the intakes used for the carburetor under the nose. Some filters have been placed inside in order to prevent the plane from alien substances when being on an accidental runway. There are 3 different types of shape for this panel: one with 32 round holes, the “close” type panel, and the shark panel seen on the RAF Mustang IV. All these 3 types can be recreated with SWS!! Enjoy the reproduction of the real airplane with the SWS kit!

 

2) Propeller

 

Thoroughly enjoy the difference!! From Hamilton Standard and Air Products: a set of 2 different propellers!

 

Enjoy the difference between the Hamilton Standard propellers with a hollow steel cuff, and the Air Products propellers made in solid aluminium to make them lighter. Both types are reproduced thanks to thorough investigations.

 

3) Tail Wheel

Taste to its fullest this particular tail wing with SWS!! You can choose the tail wing without dorsal fin that was adopted until the initial version of P-51D!

 

The Mustang left and right horizontal stabilizers have been made as 1 single part, and were designed to improve the productivity since right and left flippers are common. Then, regarding the fixation to the fuselage, a unique method of fixation was employed. Moreover, the vertical stabilizer deals with the engine torque, so an offset of 1 degree from the central axis of the fuselage was applied! This unique and unknown structure is magnificently reproduced to the fullest in SWS!!

 

4) Markings

THE WORLD'S "STRONGEST HORSES" CAN BE RECREATED WITH THE DECALS INCLUDED INTO THE KIT!!

Mustang IV a,112 Sqn RAF,KH774

 

Mustang IV a,3 Sqn RAAF,KH716

 

 

P-51 K-10-NT Sr. No.44-12073 348th FS "Sunshine VII"

 

 

P-51 D-5-NA Sr. No.44-13410 361st FG "Lou IV"

 

 

 

 

 

 

© Lil's Hobby Center 2014